RV detailing

RV Detailing From Start to Finish

RV detailing is just like auto detailing, but on a much bigger scale! Begin the RV detailing process by power washing the entire vehicle to remove dirt, bugs and grime from the road. Make sure not to forget the roof, as it is subject to power ultraviolet light and can become yellowed or dull over time. Treat the RV as you would during a boat detailing, as both boats and most RV’s are finished with a gel coat that requires proper maintenance and care. A simple car waxing will not give the professional detailing shine and will not be as long lasting.

After power washing the RV, take a moment and pay special attention to the wheels and tires. Nothing detracts from a proper detailing job like dirt encrusted wheels and dull tires. Use a pH balanced cleaner to remove the break dust and road grime from the wheels. Be sure to rinse and, afterwards, apply a light wax to finish the wheels. If the wheels are chrome or aluminum, special polishes and cleaners are available at local shops. Professional detailing usually entails using a tire blackener to bring back that new tire shine. This should be applied very carefully, being sure not to get any on the actual tread of the tires, which can cause a slippery surface.

The next step in RV detailing is the polishing and waxing process. Auto detailing generally involves a one layer car waxing product to get the job done. Like boat detailing, the RV should receive polish first and wax second. Begin by using a gel coat polish to remove swirls, oxidation and any old, accumulated wax. After the polishing has removed swirls and the paint is clean, a natural wax or sealant can be applied. Buff in small sections and be sure not to allow wax to dry on the vehicle. Use a clean terry cloth or micro-fiber towel to remove any excess wax and to buff to a high shine. The biggest parts of the RV detailing process are finished. Now the details begin.

Use a blackener or exterior chrome trim product to buff the rubber, vinyl, plastic and chrome trim pieces on the RV. A good RV detailing job will require several different products to bring out the qualities of each different material. For aluminum sections on the RV, special polishes and sealants should be used to protect from galvanic corrosion. Hinges, railings and window trim are often subject to corrosion, so pay special attention to their care and remove any built-up rust that begins the corrosion process.

Finally, the last step to the RV detailing process is taking care of the glass and plastic pieces still left. RV’s have a number of windows and keeping them crystal clear is not only an advantage when it comes to the overall picture of the RV, but also makes for safer driving. Use a professional glass cleaner to remove grime, dirt and cloudy surfaces. A rain repellent is good to apply to glass surfaces after as a sealant to help slick raindrops off and keep dirt from obstructing vision through the window. The detailing process is now finished with a professional look and at a fraction of the cost!

Article Source: http://www.article-heaven.com

Bob Donegan is the author of this article on spokane detailing. Find more information about spokane boat detailinghere.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

# of Ratings = 1 | Rating = 5/5